Sunny Health & Fitness ENDURANCE Series User Manual page 12

ADJUSTMENTS & USAGE GUIDE
18
20
12
50
39
H
CLEANING
The recumbent bike can be cleaned with a soft, clean, damp cloth. Do not use abrasives or
solvents on plastic parts. Please wipe your perspiration off the recumbent bike after each use. Be
careful not to get excessive moisture on the computer display panel as this might cause electrical
hazard or electronics to fail.
Please keep the recumbent bike, especially the computer, out of direct sunlight to prevent screen
damage.
Please inspect all assembly bolts and pedals on the recumbent bike for proper tightness every
week.
STORAGE
Store the recumbent bike in a clean and dry environment, away from children.
28
50
39
I
MOVING THE RECUMBENT BIKE
To move the recumbent bike, lift up the Rear
Stabilizer (No. 28) until the Transportation Wheels
(No. 20) on the Front Stabilizer (No. 18) touch the
ground. With the Transportation Wheels (No. 20) on
the ground, you can transport the recumbent bike to
the desired location with ease.
ADJUSTING THE BALANCE
In order to achieve a smooth and comfortable ride, you
must ensure that the recumbent bike is stabled and
secured. If you notice that the recumbent bike is
unbalanced during use, you should adjust both
Adjustable End Cap (No. 29) and Foot Pad (No. 98)
located beneath the front and rear stabilizers. To do
so, simply rotate both Adjustable End Cap (No. 29)
and Foot Pad (No. 98) until the recumbent bike
becomes levelled with the floor surface.
ADJUSTING THE RESISTANCE
Rotate Tension Control Knob (No. 12) clockwise to
increase the level of resistance, rotate the Tension
Control Knob (No.12) counter-clockwise to decrease
the level of resistance. Level 1 is the lowest and level 8
is the highest.
ADJUSTING THE SADDLE
Press down Adjustment Handle (No. 39) and loosen
Saddle (No. 50) to adjust suitable position, as shown
in Pic H. Pull up Adjustment Handle (No. 39) to
secure suitable position, as shown in Pic I.
11