Table of Contents
Advertisement
HPS-246U4A/HPS-246UTA
VT-UTF8 Combo Key
Support
Recorder Mode
Resolution 100x31
Putty KeyPad
3.6.2.6.2 Console Redirection Settings
Item
Out-of-Band Mgmt Port
Terminal Type
Bits per second
50 HPS-246U4A/HPS-246UTA Quick Reference Guide
Disabled
Enabled[Default]
Disabled[Default]
Enabled
Disabled[Default]
Enabled
VT100[Default]
LINUX
XTERMR6
SCO
ESCN
VT400
Option
COM1[Default]
COM2
COM3(Serial Over LAN (SOL))
VT100
VT100+
VT-UTF8[Default]
ANSI
9600
19200
'start' signal can be sent to re-start the flow.
Hardware flow control uses two wires to send
start/stop signals.
Enable VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
With this mode enabled only text will be sent.
This is to capture Terminal data.
Enables or disables extended terminal resolution.
Select FunctionKey and KeyPad on Putty.
Description
Microsoft Windows Emergency
Management Services(EMS) allows for
remote management of a Windows
Server OS through a serial port.
VT-UTF8 is the preferred terminal type
for out-of-band management. The next
best choice is VT100+ and then VT100.
See above, in Console Redirection
Settings page, for more Help with
Terminal Type/Emulation.
Select serial port transmission speed.
The speed must be matched on the
Advertisement
Table of Contents
