Server Mgmt - Avalue Technology HPS-246U4A Quick Reference Manual

HPS-246U4A/HPS-246UTA
Item
Wake Up by Ring
USB Standby Power
3.6.4

Server Mgmt

Item
BMC Support
Wait For BMC
FRB-2 Timer
FRB-2 Timer timeout
FRB-2 Timer Policy
OS Watchdog Timer
72 HPS-246U4A/HPS-246UTA Quick Reference Guide
Option
Disabled
Enabled[Default]
Disabled
Enabled[Default]
Options
Enabled[Default]
Disabled
Enabled
Disabled[Default]
Enabled[Default]
Disabled
3 minutes
4 minutes
5 minutes
6 minutes[Default]
Do Nothing[Default]
Reset
Power Down
Power Cycle
Enabled
Disabled[Default]
Wake Up by Ring from S3/S4/S5.
Enable/Disabled USB Standby Power
during S3/S4/S5.
Description
Enable/Disable interfaces to communicate with BMC.
Wait For BMC response for specified time out. BMC
starts at the same time when BIOS starts during AC
power ON. It takes around 30 seconds to initialize
Host to BMC interfaces.
Enable or Disable FRB-2 time (POST timer).
Enter value Between 3 to 6 min for FRB-2 Timer
Expiration value.
Configure how the system should respond if the FRB-2
Timer expires. Not available if FRB-2 Timer is
disabled.
If enabled, starts a BIOS timer which can only be shut
off by Management Software after the OS loads. Helps
determine that the OS successfully loaded or follows
Description