Battery Electrical Connection; Disconnect - Club Car CARRYALL 502 ELECTRIC Operator's Manual

Table of Contents

Advertisement

WARNING
To charge with an onboard charger:
1.
Disable the vehicle.
2.
Turn off all accessories.
3.
Connect the AC cord (1) to the power source.
Note:
The vehicle will start to charge in 10 seconds or less.
4.
Before vehicle operation:
4.A
Disconnect the AC cord from the power source.
4.B
Retract the AC cord.

BATTERY ELECTRICAL CONNECTION

DISCONNECT THE BATTERIES
Before the batteries are disconnected:
• Disable the vehicle.
To disconnect the batteries:
DANGER
1.
Set the Run/Tow switch to TOW.
2.
Disconnect the negative (-) cable (1).
CARRYALL 502 ELECTRIC
Operators Manual
TPCC01DQ00EN019 (Edition C)
CHARGING THE BATTERIES WITH ACCESSORIES ON CAN CAUSE
A FIRE AND SERIOUS PERSONAL INJURY. TURN OFF ALL
ACCESSORIES BEFORE CHARGING THE BATTERIES.
LOOSE CORD CONNECTIONS CAN CAUSE A FIRE. MAKE SURE
THAT ALL CORD CONNECTIONS AT THE RECEPTACLE ARE CLEAN
AND TIGHT.
BATTERIES DISCONNECTED OR CONNECTED WITH THE RUN/
TOW SWITCH SET TO RUN CAN CAUSE A BATTERY EXPLOSION
AND SERIOUS PERSONAL INJURY. SET THE RUN/TOW SWITCH
TO TOW BEFORE THE BATTERIES ARE DISCONNECTED OR
CONNECTED.
Battery Maintenance
Battery Electrical Connection
Page 69
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents