Cuisinart CPG-700 Owner's Manual page 9

ASSEMBLY INSTRUCTIONS
STEP 2 - ATTACHING LEGS TO MAIN BARREL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
• Attach the Bottom Shelf (21) to the legs using four sets of Screw (A),
Lock Washer (B), and Washer (C), as shown.
If the screw holes do not line up, the legs may have
been attached incorrectly in Step 1.
A
x 4
B
x4
C
x4
STEP 3 - ATTACHING WHEELS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
• Attach the two Locking Casters (18) to
the Legs (17). Hand tightening is sufficient.
You can adjust these casters later to ensure
the grill is level with the floor.
• Attach the two Wheels (19) to the Legs (20)
by inserting the Wheel Pin (D) through the
wheel and leg. Place the Wheel Washer (F)
on the opposite side and secure it with the
Cotter Pin (E), as shown in the picture.
D
x 2
E
x 2
F
x 2
9