Cuisinart CPG-700 Owner's Manual page 16

ASSEMBLY INSTRUCTIONS
STEP 17 - HOPPER
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
• Remove the two pre installed screws on
the back of the hopper and use them to
attach the Cord Wrap (7).
STEP 18 - HOPPER INSTALLATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
• Insert the hopper into the
rectangular hole on the side of grill
body, ensure the four holes shown
in the bubble line up with the four
threads on the hopper body.
• Attach the hopper to the body
using four Screws (I) paired with
Washers (C) and Lock Washers (B).
It is recommended to perform this
step with two people, one person
to hold the hopper up while the
other person installs the screws.
Installing the top two screws first
will make things easier.
NOTE: Screw (I) is longer than the
•
Screw (A) that have been used in
previous steps.
B C
x 4
I
x 4 x4
16