Table of Contents
Advertisement
OPERATING THE GRILL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Read and follow all warnings and instructions contained in the preceding sections of this manual.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Control Panel
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
•
•
Control Panel: The LCD Screen is used as the information center for your unit. The LCD screen will display
the current grill temperature (ACTUAL) and meat probe temperature (MP1). See Troubleshooting for more
information on error codes.
•
Flashing Screen: Indicates the unit was just connected to AC power. Screen flashes three times, then turns
off.
•
MP1 MP2: Indicates the meat probe temperature when probe is connected.
•
Actual: Indicates the current temperature of unit.
•
Set: Indicates the desired temperature that has been selected.
•
noP: Indicated that no meat probe is connected.
•
Motor: Indicates the auger motor is turning and feeding pellets to the fire pot.
•
Ignitor: Indicates the igniter is on. When first starting your unit, the igniter runs continuously for the start-up
cycle.
•
Fan: Indicates the fan is running. If the grill is in operation, the fan is on.
•
Prime: Press and hold the Prime Button to activate an extra feed of pellets to the fire pot. This can be used
to add more fuel to the fire just before opening the barrel lid, resulting in a quicker heat recover time. It can
also be used to add more fuel while smoking, to increase the intensity of clean smoke flavor. Overfeeding the
fire pot may cause damage to the grill barrel paint.
•
F/C: The Temperature Switch Button is used to change the temperature readout on the LED Screen. Press
the button to switch to Fahrenheit (°F) or to Celsius (°C), as preferred. Default is set to Fahrenheit.
•
Temperature Control Dial: Allow you to set your desired temperature. Rotate the knob marker to select
from Smoke, any of the eight temperature presets, or High. Once rotating the dial, the SET Temperature on
the LCD Screen will adjust.
•
OFF: The Off Setting on the Temperature Control Dial is the OFF mode for the unit. The unit will not
function on this setting.
•
SMOKE: The Smoke Setting on the Temperature Control Dial is the lowest smoking mode for the unit.
The grill operates at the lowest temperature, without the fire going out.
•
HIGH: The High Setting on the Temperature control Dial is the highest heat level for the unit. The grill
operates at the highest temperature. When the lid is open, the grill will run at this speed to compensate
for the loss of heat in the barrel.
•
Plug-In Connection Port: The plug-in connection port on the front of the control board is for the meat
probe. When the meat probe is connected, the temperature is displayed on the LCD Screen. When the meat
probe is not in use, disconnect the adapter from the connection port.
WARNING - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
250
250
225
225
PRIME
PRIME
200
200
S S mo
mok k e e
F/C
F/ C
O O ff ff
21
300
300
350
350
400
400
450
450
475
475
High
High
Advertisement
Table of Contents
