Machine Calibrations; Chuck "0" (Zero) Calibration - rav G3.150 Translation From The Original Instructions

RAVAGLIOLI S.p.A.
G3.150 - GP3.150 - G3.150S - GP3.150S - G3.150WS - GP3.150WS - G3.150WSPLUS - GP3.150WSPLUS - G3.150SA - G3.150WSA

15.3 Machine calibrations

Press the button
following screen page on monitor:
Fig. 72
1 2
KEY
1 – Chuck "0" (zero) calibration
2 – Weight measurement sensors calibration
3 – Gauges calibration
INSTRUCTION, USE AND
MAINTENANCE MANUAL
(Fig. 67 ref. 2) to display the
3

15.3.1 Chuck "0" (zero) calibration

Press the button
following screen page on the monitor:
After making sure that the chuck is unloaded (no wheel
or mounted accessories) and in the case of closed
pneumatic chuck, press the button
the guard. The chuck will rotate for a few minutes until
you see the screen below:
At this point the machine has all its measuring fields.
Press button to return to calibrations screen
page.
1297-M058-00
Page 76 of 91
(Fig. 72 ref. 1) to display the
and close
EN