Table of Contents
Advertisement
RAVAGLIOLI S.p.A.
G3.150 - GP3.150 - G3.150S - GP3.150S - G3.150WS - GP3.150WS - G3.150WSPLUS - GP3.150WSPLUS - G3.150SA - G3.150WSA
15.1.3 User management
The "User Management" function is disabled on ma-
chine delivery. To enable it, proceed as described in
Para 15.1. After enabling, the icon will be displayed
on every page (Fig. 69 ref. 1).
The wheel balancers can be used simultaneously by
4 different users.
Fig. 69
1
Fig. 70
INSTRUCTION, USE AND
MAINTENANCE MANUAL
2
1
Press button
, shown on the monitor (Fig. 69
ref. 2) or select the field (Fig. 70 ref. 1) and subse-
quently press the button
page below:
Dyn (CAR)
15.5"
312.0 mm
7.5"
A
AluS (CAR)
15.0"
36.0 mm
14.5"
B
369.0 mm
KEY
A – Program used in the last carried out spin
B – Acquired measurements for the last carried out
spin
Press any of the available numbers on the buttons at
the bottom of the page to select the corresponding
user. The system stores the data relating to the last
performed spin according to the different operators.
You can recall the desired user each time the pro-
gram displays the specific button (Fig. 69 ref. 2 and
Fig. 70 ref. 1). The measurements stored for each
user are lost when the machine is switched off.
User management is valid for any wheel balancer
function.
TO ENABLE OR DISABLE "USER
MANAGEMENT" FUNCTION, SEE
PARAGRAPH 15.1. IF THE FUNC-
TION IS DEACTIVATED, BUTTON
IS DISPLAYED.
1297-M058-00
Page 74 of 91
to display the screen
EN
Advertisement
Table of Contents
