Alu-2; Alu-3; Alu-4 - rav G3.150 Translation From The Original Instructions

RAVAGLIOLI S.p.A.
G3.150 - GP3.150 - G3.150S - GP3.150S - G3.150WS - GP3.150WS - G3.150WSPLUS - GP3.150WSPLUS - G3.150SA - G3.150WSA

14.7.9 ALU-2

ALU-2 function balances wheels with light alloy rims
by fitting adhesive weights on the outside and inside
of the rim. The position of the outer weight is not vis-
ible but hidden inside. Enter the measurements (see
Par. 14.2.1 or 14.6.1) and proceed as for dynamic
unbalance.
At the end of the procedure, the wheel balancing condi-
tions can be checked by performing a trial spin.
The procedure has now been completed.

14.7.10 ALU-3

ALU-3 function is a procedure that uses mixed weights
to offset wheel unbalance: weight with clip on inner
side of wheel, adhesive weight on outer side, not visible
because inside the rim.
Enter the measurements (see Par. 14.2.1 or 14.6.1)
and proceed as for dynamic unbalance.
At the end of the procedure, the wheel balancing condi-
tions can be checked by performing a trial spin.
The procedure has now been completed.
INSTRUCTION, USE AND
MAINTENANCE MANUAL

14.7.11 ALU-4

ALU-4 function is a procedure that uses mixed weights
to offset wheel unbalance: weight with clip on inner
side of wheel, adhesive weight on outer side.
Enter the measurements (see Par. 14.2.1 or 14.6.1)
and proceed as for dynamic unbalance.
At the end of the procedure, the wheel balancing condi-
tions can be checked by performing a trial spin.
The procedure has now been completed.
1297-M058-00
Page 60 of 91
EN