Table of Contents
Advertisement
1297-M058-00
EN
Page 61 of 91
G3.150 - GP3.150 - G3.150S - GP3.150S - G3.150WS - GP3.150WS - G3.150WSPLUS - GP3.150WSPLUS - G3.150SA - G3.150WSA
14.8 Optional balancing programs
14.8.1 ECO-WEIGHT mode (standard on some
models)
TO USE THE ECO-WEIGHT PRO-
CEDURE IT IS NECESSARY THAT
THE DISTANCE-DIAMETER CALI-
PER ARM IS ENABLED IN THE
"OPTIONS" MENU DESCRIBED IN
PAR. 15.1.
THE ECO-WEIGHT PROCEDURE
CAN ONLY BE USED WITH THE
PROGRAM ALU-S.
This procedure represents a modern system for the
reset of the unbalance in order to reduce weights con-
sumption. This procedure ensures a fastest execution
of the operations, thanks to a lesser number of spins
and repositioning.
After making the wheel spin in ALU-S mode, the moni-
tor shows the total of 2 adhesive weights to precisely
correct STATIC and DYNAMIC unbalance.
It is possible to fit a single weight at a predetermined
distance from the machine, so as to optimize the weight
consumption and reduce both the DYNAMIC and any
remaining STATIC unbalance as much as possible.
Unlike the standard STATIC procedure, the ECO-
WEIGHT procedure, though only using one weight,
also considerably reduces the DYNAMIC unbalance,
because the fitting distance of the weight on the rim
is also calculated.
From ALU-S unbalance results page, if there is con-
siderable static unbalance, press the button
display on the following monitor screen:
INSTRUCTION, USE AND
MAINTENANCE MANUAL
Press button
automatically the wheel into weight fitting position.
Fig. 61
2
KEY
1 – Only weight to be fitted
2 – Last program and last values used for the spin
3 – Residual dynamic unbalance value (if the value
4 – Static unbalance value (if the value is yellow, it
5 – Residual dynamic unbalance value (if the value
6 – Arrows indicating the weight fitting point with
to
to select such procedure and bring
1
6
3 4 5
is yellow, it is not recommended to carry out
ECO-WEIGHT procedure)
is not recommended to carry out ECO-WEIGHT
procedure)
is yellow, it is not recommended to carry out
ECO-WEIGHT procedure)
distance-diameter caliper arm
RAVAGLIOLI S.p.A.
Advertisement
Table of Contents
