Protection Guard Assembly With Automatic Width Measuring De- Vice (Standard On Some Models) - rav G3.150 Translation From The Original Instructions

1297-M058-00
EN
Page 21 of 91
G3.150 - GP3.150 - G3.150S - GP3.150S - G3.150WS - GP3.150WS - G3.150WSPLUS - GP3.150WSPLUS - G3.150SA - G3.150WSA
9.2.6 Protection guard assembly with auto-
matic width measuring device (stand-
ard on some models)
1. Fit the protective casing, complete with automatic
width measuring device, as described in Par. 9.2.5.
2. Connect the ultrasound sensor cable (Fig. 19
ref. 1) of the automatic width measuring device
(Fig. 19 ref. 2) to the provided connector (Fig. 19
ref. 3).
3. At the end of the connection, introduce the con-
nectors in wheel cover slot (Fig. 19 ref. 4), as il-
lustrated in Fig. 19. Eventually, fasten connector's
cable (Fig. 19 ref. 3) with a clamp (Fig. 19 ref. 5).
Fig. 19
INSTRUCTION, USE AND
MAINTENANCE MANUAL
9.2.7 Protection guard assembly with laser
1. Fit the protective casing, complete with 12 o'clock"
laser device" as described in Par. 9.2.5.
2. Connect the cable (Fig. 20 ref. 1) of the external
laser device (Fig. 20 ref. 2) to the provided con-
nector (Fig. 20 ref. 3).
3. At the end of the connection, introduce the con-
nectors in wheel cover slot (Fig. 20 ref. 4), as il-
lustrated in Fig. 20. Eventually, fasten connector's
cable (Fig. 20 ref. 3) with a clamp (Fig. 20 ref. 5).
Fig. 20
device "12 o'clock" (optional)
RAVAGLIOLI S.p.A.