1297-M058-00
EN
Page 23 of 91
G3.150 - GP3.150 - G3.150S - GP3.150S - G3.150WS - GP3.150WS - G3.150WSPLUS - GP3.150WSPLUS - G3.150SA - G3.150WSA
9.2.10 Fitting of ultrasound Run-out (optional)
1. Fit the ultrasound sensor support plate (Fig. 22
ref. 1) to the bracket (Fig. 22 ref. 2) using the
screws (Fig. 22 ref. 3), the washers (Fig. 22
ref. 4) and the nuts (Fig. 22 ref. 5).
Fig. 22
2. Demount wheel balancer bridge.
INSTRUCTION, USE AND
MAINTENANCE MANUAL
3. Mount the card (Fig. 23 ref. 2).
4. Connect ultrasound Run-out cable plug (Fig. 23
ref. 1) to the electronic card (Fig. 23 ref. 2), as
shown in Fig. 23 (blue ref. 4 cable, brown ref. 5
cable and black ref. 6 cable). Connect the ultra-
sound Run-out card (Fig. 23 ref. 2) to the wheel
balancer main card, using the provided cable JP18
(Fig. 23 ref. 3). Carry out the connection as shown
in Fig. 23.
Fig. 23
5. Fix the cables with clamps not to let them hinder
the ordinary operation of the machine.
6. Mount wheel balancer protection guard again.
RAVAGLIOLI S.p.A.
FOR THE CONNECTIONS, REFER
TO WIRING DIAGRAMS.