Display With Keyboard; Wheel Balancing; Switching The Machine On And Off - rav G3.150 Translation From The Original Instructions

Table of Contents

Advertisement

RAVAGLIOLI S.p.A.
G3.150 - GP3.150 - G3.150S - GP3.150S - G3.150WS - GP3.150WS - G3.150WSPLUS - GP3.150WSPLUS - G3.150SA - G3.150WSA

13.0 DISPLAY WITH KEYBOARD

The wheel balancers are equipped with a multifunction
LCD display, equipped with a keyboard to interact/
operate the controls present in graphical form on the
same display.
On such display are displayed all the instructions for
the correct wheel balancing, for example indicating
where the operator shall fit adhesive or clip weights and
the balancing mode and/or option used, as well as cor-
rect wheel rotation for inner/outer weights positioning.
Fig. 43
KEY
1 – Display
2 – Function push button (red)
3 – Function push button (yellow)
4 – Function push button (grey)
5 – Function push button (blue)
6 – Function push button (green)
7 – Previous page push button
8 – Next page/print push button
9 – Push button panel (keyboard with 7 keys)
INSTRUCTION, USE AND
MAINTENANCE MANUAL

14.0 WHEEL BALANCING

14.1 Switching the machine on and off

Press the "ON" switch (Fig. 27 ref. 1), located in the
rear part of the equipment.
Wait a few seconds up to the complete loading of the op-
erational program. The equipment is ready to operate
when the main screen "Home" appears on the monitor.
IN THE CASE OF PNEUMATIC
MODELS, ON STARTING UP , THE
PNEUMATIC CHUCK IS ALWAYS
OPENED. ALWAYS KEEP YOUR
HANDS AND OTHER PARTS OF
THE BODY AWAY FROM THE MOV-
ING CHUCK.
ALSO TAKE CARE IF A WHEEL IS
ALREADY FITTED ON THE CHUCK,
AS THIS COULD BE FORCED OFF
THE SHAFT DURING THE OPEN-
ING OF THE CHUCK ITSELF .
Fig. 44
A B
C
4
KEY
A – Displaying operations/information area
B – Colours for identification of the buttons to be
used
C – Function icons
1 – Programs and measurements acquisition but-
tons
2 – Wheel spin push button
3 – Go to next page
4 – Pneumatic chuck opening/closing (on models
with pneumatic chuck only) (generally to be
used in case of emergency)
5 – User management (if enabled) (user manage-
ment is not enabled on machine delivery)
1297-M058-00
Page 44 of 91
5
1
2
3
EN

Advertisement

Table of Contents
loading

Table of Contents