Care & Maintenance; Using The Blender For Stuck-On Ingredients - Ninja CB352SM Owner's Manual

CARE & MAINTENANCE
USING THE BLENDER
FOR STUCK-ON INGREDIENTS
NOTE: For best results, use a dishwasher
to remove stuck-on ingredients.
1 After processing, immediately clean the
container and blade assembly under
warm, soapy water.
2 Depending on the container, fill with soap
and water according to the following
instructions:
2�1 L Pitcher:
1 OR 2 SMALL DROPS OF DISH SOAP
FILL WATER TO
DOUGH MAX LINE
With the dough or stacked blade
assembly installed, fill with warm water up
to DOUGH MAX line and add 1 or 2 small
drops dish soap. Secure pitcher lid, and
ensure the pour spout is securely closed.
Power Smoothie Bowl:
1 OR 2 SMALL DROPS OF DISH SOAP
FILL WATER TO TOP
OF BUILT-IN TAMPER
Fill with warm water up to top of built-in
tamper and add 1 or 2 small drops dish
soap. Install blade assembly.
NOTE: If using the Power Smoothie Bowl,
twist the built-in tamper counterclockwise
continuously while cleaning.
Power Nutri Cup:
1 SMALL DROP OF DISH SOAP
FILL WATER HALFWAY
Fill halfway with warm water and
add 1 small drop dish soap. Install
blade assembly.
3 Install the container on the motor base.
Select BOWL, then press START/STOP.
4 Once program is complete, thoroughly
rinse container and blade assembly
under warm, soapy water. Use the
included cleaning brush to remove any
remaining residue.
SG ninjakitchen.sg | MY ninjakitchen.my
21