Using The Power Blender & Processor Pitcher - Ninja CB352SM Owner's Manual

USING THE POWER BLENDER & PROCESSOR PITCHER
& DOUGH BLADE ASSEMBLY – CONT.
6a If using an Auto-iQ program, use the dial
to select DOUGH, then press START/STOP.
The preset feature will automatically stop
at the end of the program. To stop the unit
at any time, press START/STOP.
6b For Manual mode, press IQ/MANUAL.
Use the dial to select speeds 1 or 2, and
press START/STOP. Once the ingredients
have reached your desired consistency,
press START/STOP, and wait for the unit
to come to a complete stop.
IMPORTANT: Only use speeds 1 or 2
when using the Dough Blade Assembly.
7 Remove the pitcher from the motor base
by turning it counterclockwise and then
lifting up.
14
SG +65 800 120 5111 | MY +60 1800 803 915
8 Remove the lid and Dough Blade
Assembly before removing contents. To
remove the lid, press the RELEASE button
and lift the handle. To remove the blade
assembly, carefully grasp it by the top of
the shaft and pull straight up. The pitcher
can then be emptied.
9 Turn the unit off by pressing the Power
button. Unplug the unit when finished.
Refer to the Care & Maintenance
section for cleaning and storage
instructions.