Care & Maintenance - Ninja BL773CO Owner's Manual

Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1
Separate/remove all parts from each other.
2 Hand Washing: Wash the lids, pitcher, bowl, Nutri
Ninja cup, cutting discs and blade assemblies
®
in warm, soapy water. When washing the blade
assemblies and cutting discs, use a dish-washing
utensil with a handle to avoid direct hand contact with
blades. Handle blade assemblies and cutting discs with
care to avoid contact with sharp edges. Rinse and air
dry thoroughly.
Dishwasher: The containers, lids, blade assemblies,
cutting discs and attachments are all dishwasher safe.
The lids, cutting discs and blade assemblies are top
rack dishwasher safe. Ensure that the blade assemblies
and cutting discs are removed from the containers
before placing in the dishwasher.
WARNING: Handle the Stacked Blade Assembly,
Chopping Blade Assembly, Nutri Ninja Blade
Assembly, Grating Disc and Slicing/Shredding
Disc with care when washing, as the blades are
sharp. Contact with the blades' edges can result
in laceration.
3
Wipe the motor base clean with a damp cloth.
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
HOW TO STORE
1 Store the Ninja Mega Kitchen System
®
the blade assembly inside the corresponding container
with the lid secured on top. Do not place anything on
top. Store the rest of the attachments in a safe place
where they will not be damaged and won't cause harm.
Loosely wrap the power cord around the motor base.
RESETTING THE MOTOR THERMOSTAT
The Ninja Mega Kitchen System features a unique safety
system which prevents damage to the unit's motor and drive
system should you inadvertently overload your appliance.
If the appliance is being overloaded, the motor will stop. To
reset the appliance, follow the resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure that no
food is jamming the blade assembly.
3 Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
upright with
®
www.ninjakitchen.com 12