Cleaning; Storing; Resetting The Motor; Ordering Replacement Parts - Ninja CB352SM Owner's Manual

CARE & MAINTENANCE – CONT.

CLEANING

Hand-Washing
Wash containers, lids, and blade
assemblies in warm, soapy water.
Use a dishwashing utensil with
a handle to avoid direct contact
with the blades. Use the included
cleaning brush to remove excess
residue, such as when dealing with
stuck-on ingredients, like doughs
and batters. Exercise care when
handling the blade assembly as
the blades are sharp. Thoroughly rinse and
air-dry all parts.
NOTE: The built-in tamper in the Power
Smoothie Bowl is not removable.
Dishwasher
Containers, lids, and blade assemblies are
dishwasher safe. Ensure the blade assembly
and lid are removed from the container
before placing in the dishwasher.
NOTE: For best results, use a dishwasher
to remove stuck-on ingredients.
Motor Base
Unplug the motor base before cleaning.
Wipe motor base with a clean, damp cloth.
DO NOT use abrasive cloths, pads, or
brushes to clean the base.
22
SG +65 800 120 5111 | MY +60 1800 803 915

STORING

For cord storage, wrap cord with hook-and-
loop fastener near the back of the motor
base. DO NOT wrap the cord around the
bottom of the base for storage.
DO NOT store blended or unblended
ingredients in the cup or smoothie bowl
with the blade assembly attached.
DO NOT stack items on top of the
containers. Store any remaining attachments
alongside the unit or in a cabinet where they
will not be damaged or create a hazard.
Store the grinder attachment with the
lid attached to the grinding cup/blade
assembly.

RESETTING THE MOTOR

This unit features a unique safety system
that prevents damage to the motor and
drive system should you inadvertently
overload it. If the unit is overloaded, the
motor will be temporarily disabled. Should
this occur, follow the reset procedure below.
1 Unplug the unit from the electrical outlet.
2 Allow the unit to cool for approximately
15 minutes.
3 Remove the container's lid and blade
assembly. Empty the container and
ensure no ingredients are jamming the
blade assembly.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the most
typical cause of appliance overload.

ORDERING REPLACEMENT PARTS

To order additional parts and attachments,
visit SG ninjakitchen.sg or MY ninjakitchen.my