Canon 1418C025 User Manual page 366

Is the drum in the toner cartridge deteriorated?
● Replace the toner cartridge with a new one.
Replacing Toner Cartridges(P. 375)
Are you printing a document with strong contrasts?
● Change the setting for [Special Print Mode] using the Printer Driver.
When set to [Special Settings 2], print density is lighter compared with [Off] or [Special Settings 1]. Text and
lines may also appear faded.
A Portion of the Page Is Not Printed
Do you print data without margins?
● This symptom occurs if a margin is set to none in the printer driver. A margin of 1/4" (5 mm) or less
around the edge of paper or 3/8" (10 mm) or less around the edge of envelopes is not printable with the
machine. Make sure to have margins around the document to print.
[Finishing] tab
Print Density Is Uneven
Is the amount remaining in the toner cartridge nearly empty?
● Check the amount remaining in the toner cartridge, and replace the toner cartridges as necessary.
Replacing Toner Cartridges(P. 375)
Is printing sometimes uneven when printing fine lines?
● Change the setting for <Special Printing Mode J>.
Troubleshooting
[Advanced Settings] [Expand Print Region and Print]
360
[Off]