Glpointsize - HP b2600 Reference Manual

P

glPointSize

glPointSize
glPointSize: specify the diameter of rasterized points.
C Specification
void glPointSize(
Parameters
size
Description
glPointSize specifies the rasterized diameter of both aliased and anti-aliased points.
Using a point size other than 1 has different effects, depending on whether point
anti-aliasing is enabled. To enable and disable point anti-aliasing, call glEnable and
glDisable with argument GL_POINT_SMOOTH. Point anti-aliasing is initially disabled.
If point anti-aliasing is disabled, the actual size is determined by rounding the supplied
size to the nearest integer. (If the rounding results in the value 0, it is as if the point size
were 1.) If the rounded size is odd, then the center point (x, y) of the pixel fragment that
represents the point is computed as
( x
where w subscripts indicate window coordinates. All pixels that lie within the square
grid of the rounded size centered at (x, y) make up the fragment. If the size is even, the
center point is
( x
and the rasterized fragment's centers are the half-integer window coordinates within the
square of the rounded size centered at (x, y). All pixel fragments produced in rasterizing
a non anti-aliased point are assigned the same associated data, that of the vertex
corresponding to the point.
If anti-aliasing is enabled, then point rasterization produces a fragment for each pixel
square that intersects the region lying within the circle having diameter equal to the
current point size and centered at the point's (x
fragment is the window coordinate area of the intersection of the circular region with the
corresponding pixel square. This value is saved and used in the final rasterization step.
The data associated with each fragment is the data associated with the point being
rasterized.
Not all sizes are supported when point anti-aliasing is enabled. If an unsupported size is
requested, the nearest supported size is used. Only size 1 is guaranteed to be supported;
others depend on the implementation. To query the range of supported sizes and the size
difference between supported sizes within the range, call glGet with arguments
GL_POINT_SIZE_RANGE and GL_POINT_SIZE_GRANULARITY.
338
GLfloat size)
Specifies the diameter of rasterized points. The initial value is 1.
+ .5, y + .5)
w w
+ .5 , y + .5 )
w w
, y ). The coverage value for each
w w
Chapter 14