Rack Stability; Symbols In Text - HP BladeSystem bc1500 Setup And Installation Manual

Rack Stability

Symbols in Text

Å
Ä
Setup and Installation Guide
This symbol indicates that the component exceeds the
recommended weight for one individual to handle safely.
WARNING: To reduce the risk of personal injury or
damage to the equipment, observe local occupational health
Weight in kg
and safety requirements and guidelines for manual material
Weight in lb
handling.
WARNING: To reduce the risk of personal injury or damage to
the equipment, be sure that:
• The leveling jacks are extended to the floor.
• The full weight of the rack rests on the leveling jacks.
• The stabilizing feet are attached to the rack if it is a
single-rack installation.
• The racks are coupled together in multiple-rack installations.
• Only one component is extended at a time. A rack may
become unstable if more than one component is extended for
any reason.
These symbols may be found in the text of this guide. They have the
following meanings.
WARNING: Text set off in this manner indicates that failure to follow
directions in the warning could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow
directions could result in damage to equipment or loss of information.
IMPORTANT: Text set off in this manner presents essential information to
explain a concept or complete a task.
www.hp.com
About This Guide
1-3