Declaration Of Conformity For Products Marked With The Fcc Logo, United States Only; Modifications; Cables - HP BladeSystem bc1500 Setup And Installation Manual

Declaration of Conformity for Products Marked with the
FCC Logo, United States Only

Modifications

Cables

Setup and Installation Guide
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
For questions regarding your product, contact us by mail or
telephone:
■
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000
■
1-800-HP-INVENT (1-800-474-6836) (For continuous quality
improvement, calls may be recorded or monitored.)
For questions regarding this FCC declaration, contact us by mail or
telephone:
■
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
■
281-514-3333
To identify this product, refer to the part, series, or model number
found on the product.
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly approved by
Hewlett-Packard Company may void the user's authority to operate
the equipment.
Connections to this device must be made with shielded cables with
metallic RFI/EMI connector hoods in order to maintain compliance
with FCC Rules and Regulations.
www.hp.com
Regulatory Compliance Notices
A-3