Diagnostic Features - HP BladeSystem bc1500 Setup And Installation Manual

HP CCI Solution Technology

Diagnostic Features

2-10
The interconnect switch concentrates the forty 10/100 Ethernet
Blade PC network connections into four RJ-45 Gigabit Ethernet
uplink connectors. Each uplink can communicate with all 40
network connections; thus, only one to all four of these
connectors may be used providing up to a 40-to-1 reduction in the
number of network cables connected to the enclosure. The
interconnect switch is compatible with industry standards and is
fully pre-configured for immediate use.
For more information about these tools and utilities, see
"Deployment and Management."
The hardware, software, and firmware diagnostic tools that are
available include:
■
HP PC Blade Enclosure Integrated Administrator
■
Diagnostic adapter for local Blade PC access (requires optional
graphics diagnostic card)
■
Optional graphics diagnostic card
■
HP Systems Insight Manager
■
Power-On Self Test (POST)
■
Diagnostics Utility
■
Flashbin
■
Health monitoring LEDs
www.hp.com
Chapter 5,
Setup and Installation Guide