Non-Lcd Model - Kenwood NX-1200NE2 User Manual

Non-LCD Model

If your transceiver is password protected, the LED will light blue when you turn the
transceiver ON. Enter the password (up to 6 digits) using the following procedure.
1 Set the Selector to position "1".
2 Press the Side 1 or Side 2 button to enter the first digit.
The Side 1 button increases the digit value and the Side 2 button
•
decreases it. The transceiver announces the digit number as it changes.
3
Repeat step 2 for Selector positions 2 ~ 6.
• If there are less than 6 password digits, repeat for only the number of digits
the password contains.
4 Press the PTT switch to confirm the password.
• When the correct password is entered, the Blue LED turns off.
66