Kenwood NX-1200NE2 User Manual page 26

Channel Entry
In Channel Entry Mode, channel can be selected by the same operation as List
selection.
PF Button:
1
Press the programmed button to enter Channel Entry Mode.
2 Press the [ <B ] and [ C> ] buttons to select your desired channel.
3 Press the [ S ] button to confirm the entry.
To enter 2-digit channel number (example: Channel 12):
1 Press the programmed button to enter Channel Entry Mode.
2 Press the [ <B ] and [ C> ] buttons to select "1".
3 Press the [ S ] button.
4 Press the [ <B ] and [ C> ] buttons to select "2".
Press the [ A ] button to delete 1 digit number. Press and hold the [ A ]
•
button to delete all numbers.
5 Press the [ S ] button to confirm the entry.
[Analog/ NXDN/ DMR]
26