Kenwood NX-1200NE2 User Manual page 58

3 Press the [ <B ] and [ C> ] buttons to select the List.
Each time press the [ S ] button to change display type (Message → Caller
•
ID → Channel No.→ Message→ ).
Press the [A] button, delete confirmation is displayed, press the [S] button
•
to delete displayed Caller ID and Message.
Press and hold the [A] button, delete confirmation is displayed, press the
•
[S] button to delete all Caller IDs and Messages.
4 Press the Side 1 button to exit Stack Mode.
Status [Analog/ NXDN/ DMR]
Allows you to send status messages selected from the Status List.
1 PF Button: Press the programmed button to enter Status Mode.
Menu Mode:
2 Press the [ <B ] and [ C> ] buttons to select the status messages you want to
transmit.
3 Press the PTT switch or Side 2 button to send status messages.
Select "STATUS" and press the [ S ] button to enter Status Mode.
58