Kenwood NX-1200NE2 User Manual page 51

RX Auto Gain Control
Allows you to set the transceiver to automatically adjust the volume of the
receiving sound to a specific level for easy listening.
Menu Mode:
1 Select "RX AGC" and press the [ S ] button.
2 Press the [ <B ] and [ C> ] buttons to select Off, Low, or High.
3 Press the [ S ] button to confirm and exit mode.
Save Log Data
This function saves the operation and communication logs of this transceiver.
• This function is for field support use such for your dealer.
Scan [Analog/ NXDN/ DMR]
Allows you starting or stopping scan.
PF Button:
Press the programmed button to start scanning. To stop scanning, press this
button.
Menu Mode:
Select "SCAN" and press the [ S ] button to activate/ deactivate the Scan.
• The " " indicator appears on the display.
• The " " indicator blinks while paused.
Refer to "SCAN" {p. 67}.
[NXDN/ DMR]
[Analog/ NXDN/ DMR]
51