Kenwood NX-1200NE2 User Manual page 53

Scrambler/Encryption Code
Allows you to change the Scrambler Code/ Encryption Key used in the
transmission.
1 PF Button:
Press and hold the programmed button to enter Scrambler/
Encryption Code Mode.
Menu Mode:
Scrambler/Encryption Code Mode.
2 Press the [ <B ] and [ C> ] buttons to select the Scrambler Code or Encryption
Key.
• Must be set to the same code/key for transmission and reception.
3 Press the [ S ] button to confirm and exit mode.
Refer to "SCRAMBLER (ANALOG)/ ENCRYPTION (NXDN/ DMR)" {p. 71}.
Select "SCRENC C" and press the [ S ] button to enter
Scrambler Code
Encryption Key
[Analog/ NXDN/ DMR]
53