Kenwood NX-1200NE2 User Manual page 41

Manual Site Hunt
Allows you can manually move the Revert Channel to another Channel without
waiting for Site Roaming to resume.
PF Button:
On the Channel of DMR Site Roaming, press the programmed button, the Manual
Site Hunt function operates.
• Beep A (1 beep) sounds.
Menu Mode:
Select "M SITE H" and press the [ S ] button, the Manual Site Hunt function
operates.
• Search Mode Tone sounds and send a Wake up message once to other
Channels registered in the same System set in DMR Site Roaming and go to
search for repeaters that can detect the synchronization signal.
• "SEARCH" is displayed during Manual Site Hunt operation.
Medium Transmit Power
Turns Medium Transmit Power On or Off. When using a channel programmed with
low or high power, this allows you to change the output power to medium.
Menu Mode:
Select "MED PWR" and press the [ S ] button to change the Medium Transmit
Power On or Off.
Menu [Analog/ NXDN/ DMR]
PF Button:
Press the programmed button to select and perform functions using the
transceiver Menu.
[DMR]
[Analog/ NXDN/ DMR]
41