Kenwood NX-1200NE2 User Manual page 34

Group + Short Message
Allows you to specify a Group ID to send short messages.
1 PF Button:
Press the programmed button to enter Group Call Mode (NXDN/
DMR) or Selcall Mode (FleetSync/ MDC-1200/ 5-tone).
Menu Mode:
Mode (NXDN/ DMR) or Selcall Mode (FleetSync/ MDC-1200/ 5-tone).
2 Press the [ <B ] and [ C> ] buttons to select a Group ID/ name from the list.
3 Press the [ S ] button to enter Short Message Mode.
4 Press the [ <B ] and [ C> ] buttons to select a Short Message from the list
(NXDN/ DMR).
5 Press the PTT switch or Side 2 button to send short messages.
Group + Status
Allows you to specify a Group ID to send status messages.
1 PF Button:
Press the programmed button to enter Group Call Mode (NXDN/
DMR) or Selcall Mode (FleetSync/ MDC-1200/ 5-tone).
Menu Mode:
Mode (NXDN/ DMR) or Selcall Mode (FleetSync/ MDC-1200/ 5-tone).
2 Press the [ <B ] and [ C> ] buttons to select a Group ID/ name from the list.
3 Press the [ S ] button to enter Status Mode.
4 Press the [ <B ] and [ C> ] buttons to select the status messages you want to
transmit.
5 Press the PTT switch or Side 2 button to send status messages.
[Analog/ NXDN/ DMR]
Select "GRP SDM" and press the [ S ] button to enter Group Call
[Analog/ NXDN/ DMR]
Select "GRP STAT" and press the [ S ] button to enter Group Call
34