Problems with Print Quality
Horizontal White Banding
Cause
The nozzles are clogging.
Vertical White Spots (Auto Cutter Model)
Cause
The printed label has been back-
fed.
White or Black Banding
Cause
The paper is not loaded correctly.
The paper being used and the
Media Coating Type setting differ.
Print the nozzle check patterns to check the nozzles for clogging.
Nozzle Check Patterns" on page
If the nozzles are clogging, run a print head cleaning.
Head" on page
60)
If printed labels are fed backward, the printed surface is damaged by the
rollers located under the paper pressure unit.
This can occur when the print mode is set to "Stop at Cut Position" or "Stop at
Peel-Off Position", and printed labels have not been removed after each print
job is finished.
Select a print mode option other than "Stop at Cut Position" or "Stop at Peel-
Off Position", or remove printed labels after each print job is finished.
For details on the print modes, refer to the CW-C6000 Series/CW-C6500 Series
Technical Reference Guide.
Reload the paper.
(U"Loading and Replacing Paper" on page
Check the paper being used and the Media Coating Type setting of the printer
driver.
(U"Printer Driver Settings" on page
Solution and Reference
28)
Solution and Reference
Solution and Reference
34)
Troubleshooting
(U"Printing
(U"Cleaning the Print
39)
67