Table of Contents
Advertisement
If ink contacts your skin, eyes, or mouth, take the following actions.
When ink gets onto your skin, immediately wash the area with soap and water.
CAUTION
When ink gets into your eyes, immediately flush them with water. Leaving the ink as is
may result in bloodshot eyes or mild inflammation. If something is wrong, immediately
consult with a doctor.
When ink gets into your mouth, immediately spit it out and consult with a doctor.
There may be some ink around the ink supply port on a removed ink cartridge. Take
care so that it does not stain the desk or other surface.
Do not open an ink cartridge package until you are ready to install the ink cartridge in
the product.
Do not shake an ink cartridge too hard.
The ink cartridge may leak if you shake it around too much or push the sides strongly.
Do not allow foreign objects to fall into the cartridge installation section.
Doing so may result in normal printing becoming no longer possible. Remove any object
that falls into the installation section, taking care not to damage the section.
When ink is charged the first time (right after purchase), ink is consumed for filling the
print head nozzles (ink discharge holes) to get ready for printing. Therefore, the
number of the sheets that can be printed may be fewer than for cartridges installed
later.
When the printer is powered off with the
automatically capped to prevent the ink from drying. When you will not use the
printer after installing the ink cartridges, be sure to turn the power off with the
(power) button. Do not pull out the power plug or turn off the breaker while the
power is on.
Printing on water-repellent paper such as art paper, which is slow-drying, may cause
print stains. Also, if you print on glossy paper, fingerprints may get on the paper or ink
may adhere to your fingers when you touch the print surface. Select and use paper
that will not cause print stains.
Store the ink cartridges in a place out of reach of children.
Epson recommends storing ink cartridges in a cool and dark place.
If you wish to use ink cartridges that have been stored in a cold place for a long period
of time, leave them for at least 3 hours in a place that is at room temperature before
use.
Do not remove the ink cartridges from the product when storing or transporting the
product.
(power) button, the print head is
Before use
14
Advertisement
Table of Contents
