Loading And Replacing Paper - Epson CW-C6500P User Manual

Loading and Replacing Paper

This section describes how to load and replace paper. As shown below, the procedure of replacing paper differs
depending on the size and whether paper has been/is going to be supplied from inside or outside. Videos that
show the procedure are also available.
Click the URL below to view the videos.
<https://support.epson.net/p_doc/790/>
Supply from Inside (Internal)
Paper is supplied from inside the printer. Set roll paper
attached to the spindle into the printer.
c
IMPORTANT
Models
 Paper loading:
Auto Cutter
Model
 Paper removal:
 Paper ejection at paper end:
 Paper loading:
Peeler Model
 Paper removal:
 Paper ejection at paper end:
 To supply roll paper from outside the printer, prepare an external paper feeder and paper
rewinder by yourself. For more details, see the CW-C6000 Series/CW-C6500 Series
Technical Reference Guide.
 With the peeler model, you can not supply fanfold paper from outside the printer.
 When replacing paper with a different shape, form, or type of paper, change the paper
settings either from the operation panel or on the printer driver before loading the paper.
(U"Checking the Paper Information" on page
Supply from Inside (Internal)
Supply from Outside (Rear Feed)
Fanfold paper can be supplied from outside the printer
by placing it behind the printer. (Auto cutter model only)
27, "Printer Driver Settings" on page
Supply from Outside (Rear Feed)
 Paper loading:
page 40
 Paper removal:
page 48
 Paper ejection at paper end:
page 50
page 45
page 49
page 51
Basic Operation
34)
page 42
page 48
page 50
39