Front Of The Switch; Network Ports - HP ProCurve 2824 Install Manual

Front of the Switch

Power
Test, Fan and RPS
and Fault
Status LEDs
LEDs
LED Mode select button
Console port**
and indicator LEDs
Reset and Clear
buttons
Test, Fan and RPS
Power
Status LEDs
and Fault
LEDs
LED Mode select button
and indicator LEDs
Reset and Clear
buttons

Network Ports

■
Switch port LEDs
10/100/1000Base-T RJ-45 ports*
* 10/100/1000Base-T ports have the IEEE Auto MDI/MDI-X feature.
** On the Switch 2848, the console port is located on the back of the unit.
Switch port LEDs
10/100/1000Base-T RJ-45
24 or 48 auto-sensing 10/100/1000Base-T ports.
All these ports have the "IEEE Auto MDI/MDI-X" feature, which means
you can use either straight-through or crossover twisted-pair cables to
connect any network devices to the switch.
Introducing the Switch
Front of the Switch
HP ProCurve Switch 2824
!
Dual-personality ports
(10/100/1000Base-T* or
mini-GBIC)
HP ProCurve Switch 2848
Dual-personality ports
(10/100/1000Base-T* or
mini-GBIC)
1-3