Leds - HP ProCurve 1400-8G Installation And Getting Started Manual

Switch Overview
Switch Hardware Features

LEDs

The front panel of the switch provides status LEDs for system
monitoring. The following table details the functions of the various
indicators.
System LED
Power
(green)
Port LED
Link/Act
(green –
overlaid with
the port
number)
FDx
(green)
Spd
(green)
1-2
State Meaning
On The switch is receiving power.
Off The switch is NOT receiving power.
State Meaning
On The port is enabled and receiving a link indication
from the connected device.
Off The port has no active network cable connected,
or is not receiving link signal.
Flashing Indicates that there is network activity on the
port.
On Indicates the port is operating at full duplex.
Off Indicates the port is operating at half duplex.
On Ports 1-8: Indicates the port is operating at
1000 Mbps.
Off Ports 1-8: Indicates the port is operating at 10 or
100 Mbps.