Table of Contents
Advertisement
MEGA-PIXEL NETWORK CAMERA
Installation Instructions
1. Locate the mounting template at the installation position and drill the ceiling
or wall if needed.
2. Route the Power cable to the connecting place.
3. Place the camera bracket on pre-drilled position and fix it through using
mounting screws.
4. Set the camera's viewing angle by using the driver. (Refer to 'TIP' ).
5. Put the sunshield to the camera unit and tighten the sunshield-bolt.
Pan & Tilt adjustments
• Pan: Adjusts view direction
• Tilt: Adjusts view angle
• Inclination: Adjusts view rotation
1) Pan limit:
Pan is limited to +/- 90°.
2) Tilt limit:
Tilt is limited to 0°(2°) min ~ 90° max.
for wall(ceiling) installation respectively
with reference to the wall(ceiling) when
the inclination of camera module is 0°,
that is, the image is aligned horizontally.
Mounting Screw
: 4x40mm
09
Plastic Anchor
: 6x30mm
90°
90°
Advertisement
Table of Contents
