Table of Contents
Advertisement
MEGA-PIXEL NETWORK CAMERA
Installation Instructions
Installation and commissioning Instructions
• Make sure the power is removed before the installation.
• After all connections are finished properly, follow the order for applying power.
a) Plug the network cable into RJ-45 Ethernet Port.
If PoE is the unique power, there will be no need to connect Power terminal.
b) When DC12V Local power is necessary, connect the low voltage
(DC12V) first, then plug the DC adapter to DC outlets to avoid an
improper reset from power jitter and a damage from the surge voltage when
no load.
► When PoE and Local DC power are connected at the same time,
Local power has priority.
Power Supply Connections
Camera can work with either 12VDC or PoE(IEEE Std. 802.3af).
Primary and secondary grounds are completely isolated to avoid the possible
ground loop problems.
11
Advertisement
Table of Contents
