Cable Pulling Principles (cont'd)
Cable Pulling Forces (cont'd)
At the Connectors
The connectors will be subjected to the cable puller's
maximum pulling force.
Several types of rope connectors—clevises, swivels,
and rope-to-swivel connectors—are available. Follow
the instructions provided with each to provide a good
connection.
Two types of wire connectors—wire grips and pulling
grips—are available. The wire grip uses a set screw
to clamp onto the conductors of the cable. The pulling
grip consists of a wire mesh basket that slides over
the cable and grips the insulation.
Maximum
Pulling Force
44.5 kN
(10,000 lb)
A Typical Grip Setup—Clevis and Wire Grip
Maximum
Pulling Force
44.5 kN
(10,000 lb)
A Typical Grip Setup—Swivel and Pulling Grip
Greenlee Tools, Inc.
1.800.561.8187
®
Ultra Tugger
10 Cable Puller and Pulling Packages
When selecting a pulling grip, it is extremely important
to select a grip of the correct (1) type, (2) size, and
(3) maximum rated capacity.
1. Select the correct type based on the descriptions
2. Measure the circumference of the wire bundle.
3. Refer to the maximum rated capacities in the
Pulling Grip Size Table
17
www.
.com
of each type in the Greenlee catalog.
(To do this accurately, fasten a tie strap around the
bundle. Cut off and discard the tail. Then cut the tie
strap and measure its length.). Use the table pro-
vided to find the correct size.
Greenlee catalog.
Circumference Range
inches
mm
1.57–1.95
39.9–49.5
1.95–2.36
49.5–59.9
2.36–3.14
59.9–79.8
3.14–3.93
79.8–99.8
3.93–4.71
99.8–119.6
4.71–5.50
119.6–139.7
5.50–6.28
139.7–159.5
6.28–7.85
159.5–199.4
7.85–9.42
199.4–239.3
9.42–11.00
239.3–279.4
11.00–12.57
279.4–319.3
12.57–14.14
319.3–359.2
14.14–15.71
359.2–399.0
information@itm.com
Required Grip Diameter
inches
mm
0.50–0.61
12.7–15.5
0.62–0.74
15.8–18.8
0.75–0.99
19.1–25.1
1.00–1.24
25.4–31.5
1.25–1.49
31.8–37.8
1.50–1.74
38.1–44.2
1.75–1.99
44.5–50.5
2.00–2.49
50.8–63.2
2.50–2.99
63.5–75.9
3.00–3.49
76.2–88.6
3.50–3.99
88.9–101.3
4.00–4.49
101.6–114.0
4.50–4.99
114.3–126.7
Need help?
Do you have a question about the Greenlee Ultra Tugger UT10-2S and is the answer not in the manual?
Questions and answers