Setting The Screen Type - Epson PowerLite EB-L210SF User Manual

1. Turn on the projector and display an image.
2. To enlarge the image size, press the W (Wide) button on the projector's control panel.
3. To reduce the image size, press the T (Tele) button.
Note: If the projector is installed out of reach, you can also adjust the image size with the remote
control using the Digital Zoom setting in the projector menus.
Parent topic:

Setting the Screen Type

You can use the Screen Type setting to match the aspect ratio of the displayed image to the screen you
are using.
Note: This setting is unavailable when using the USB or LAN input source.
Note: If you change the Screen Type setting, the EDID settings are automatically adjusted. You cannot
change the Screen Type setting when the Content Playback setting is enabled.
Note: Certain screen type settings are only available on select projector models.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select the Installation menu and press
4. Select the Screen Type setting and press Enter.
You see a screen like this:
5. Select your screen's aspect ratio and press
Using Basic Projector Features
Enter.
Enter.
106