Setting The Lens Type; Setting The Screen Type - Epson EB-PU1006W User Manual

Note: If you installed the optional ELPLU02 short throw lens and you see a message prompting you
to manually adjust the image distortion, manually rotate the distortion ring counterclockwise. Adjust
the focus and then rotate the distortion ring again to correct image distortion.
Parent topic:

Setting the Lens Type

If you installed one of the following lenses, you need to select the model number for the lens: ELPLS04,
ELPLU02, ELPLR04, ELPLW04, ELPLM06, ELPLM07, or ELPLL07.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select the Extended menu and press
4. Select Operation > Advanced > Lens Type.
5. Select your lens model number and press
6. Press the Menu button to exit.
Parent topic:

Setting the Screen Type

You can use the Screen Type setting to match the aspect ratio of the displayed image to the screen you
are using.
Note: The Screen Type setting is not supported by the Message Broadcasting feature in the Epson
Projector Management software.
1. Turn on the projector and display an image.
Focusing the Image Using the Focus Buttons
Using Basic Projector Features
Enter.
Enter.
117