Table of Contents
Advertisement
9.2 Anemometer Sensor Replacement
To replace the anemometer, you must perform all of the steps defined in Section 9.1. Next, remove the
anemometer from the mounting bracket, as shown in Figure 15.
10. Troubleshooting Guide
If your question is not answered here, you can contact us as follows:
1. Email Support:
support@ambientweather.com
2. Live Chat Support:
3. Technical Support: 480-283-1644 (M-F 8am to 4pm Arizona Time)
Problem
Wireless remote not reporting in to
console.
There are dashes (--) on the display
console.
Version 1.1
Figure 15
www.ambientweather.com/chat.html
Solution
1. Resync the unit. Press and hold the
©Copyright 2015, Ambient LLC. All Rights Reserved.
(M-F 8am to 4pm Arizona Time)
30 seconds to resynchronize. The remote sensor
search icon
will turn on. Wait several
minutes for the remote sensor to report in, or the
search icon to turn off. Do not press any buttons
+
key for
Page 30
Advertisement
Table of Contents
