10.2 Anemometer Sensor Replacement
To replace the anemometer, you must perform all of the steps defined in Section 10.1. Next, remove
the anemometer from the mounting bracket, as shown in Figure 30.
11. Troubleshooting Guide
If your question is not answered here, you can contact us as follows:
1. Email Support:
support@ambientweather.com
2. Live Chat Support:
3. Technical Support: 480-283-1644 (M-F 8am to 4pm Arizona Time)
4. Advanced troubleshooting is available at
Problem
Wireless remote (thermo-hygrometer) not
reporting in to console.
Version 1.0
Figure 30
www.ambientweather.com/chat.html
Solution
The maximum line of sight communication range is 300'
but should be 100' under most conditions. Move the
sensor assembly closer to the display console.
©Copyright 2012, Ambient LLC. All Rights Reserved.
(M-F 8am to 4pm Arizona Time)
http://ambientweather.wikispaces.com
Page 37