Index of Parts and Functions
Front panel
• "NO EFFECT" is displayed when you press a button which is not available for the current input or signal format (the lamp lights even
when the function does not actually work).
• You cannot use the buttons for the items controlled by the MAKE system ("REMOTE ON" appears, and the lamp does not light up).
1 Speakers (stereo)
The speakers emit the same audio signal emitted from the
AUDIO (MONITOR OUT) terminals.
(☞ 5 "AUDIO MONITOR OUT (OUT 1, OUT 2) terminals (pin jack)"
on page 10)
2 VOLUME adjustment knob
Adjusts the volume.
3 Picture adjustment knob
PHASE:
Adjusts the picture hue
CHROMA:
Adjusts the picture color density
BRIGHT:
Adjusts the picture brightness
CONTRAST:
Adjusts the picture contrast
●
PHASE and CHROMA cannot be adjusted for certain signal
formats.
●
When "COMPONENT PHASE" is set to "DISABLE" and an NTSC
signal is input, PHASE can be adjusted (☞ page 18).
8
Tally lamp
This lamp is controlled by the tally function of the MAKE/TRIGGER terminal.
• You can select the color of the tally lamp from "GREEN" or "RED."
(☞ "TALLY SELECT" in "FUNCTION SETTING" on page 18 and "External Control" on page 22)
4 MUTING button
Turns off the sound (Muting).
●
To cancel the function, press the button again or turn the
VOLUME adjustment knob.
●
Muting function is also canceled when "BALANCE" of "AUDIO
SETTING" in the MAIN MENU is changed (☞ page 16).
●
Muting function cannot be activated when a menu screen is
displayed.
5
/
/ / buttons
When a menu screen is displayed
Selects or adjusts menu items (☞ "Menu Operations" on page
13).
When no menu screen is displayed
Selects the audio channels of EMBEDDED AUDIO signals
(☞ "Audio Channel Selection" on page 11).
●
Pressing
button while holding
MENU (☞ "Menu Operations" on page 13).
button displays the SET-UP