Advertisement
CONTROL LOCK
Settings for disabling the buttons on the front panel.
●
The following operations are not available when "VOL.LOCK" is selected.
– VOLUME adjustment knob
– Picture adjustment knob
●
The "ALL LOCK" function disables to control the buttons on the front panel. But following operations are available.
– Turning on/off (on standby) the monitor.
– Press the
button and
– Operate this product by external control.
When you perform operations other than the above, "
DVI INPUT SEL.
Settings for formats of signals input into the DVI-D (HDCP) terminal.
●
Automatically distinguishes signals when set to "AUTO." (Normally, select "AUTO")
●
Select "COMPO.", "RGB" or "PC" when the picture is not displayed correctly with "AUTO."
●
DVI-D input of the monitor is compatible with HDCP.
SDI FORMAT
Setting value: AUTO, MS1YCbCr, MS2YCbCr, MS3YCbCr, MS4YCbCr, MS2 RGB, MS3 RGB, 3G-B-DS
When "AUTO" is selected, 3G SDI/HD-SDI DUAL LINK signals are automatically recognized. (Normally select "AUTO")
●
If the picture is unstable with "AUTO", select the setting value according to the input signal format.
●
"M"(meaning "Manual") is displayed on the status display when a setting other than "AUTO" is selected.
all reset
Restores all the settings and adjustments of the monitor to the default.
●
"HOUR METER" and the settings done by using the VOLUME adjustment knob or Picture adjustment knob (☞ 2 3 on page 8) will not be
reset.
●
When you operate the monitor with the AC power supply, the monitor is turned off (on standby) then turned on automatically. When you
operate the monitor with the DC power supply, the monitor is turned off (on standby).
Setting value: OFF, VOL.LOCK, ALL LOCK
button to display the SET-UP MENU, and set "CONTROL LOCK" to "OFF."
Setting value: AUTO, COMPO., RGB, PC
Control lock on!" appears.
21
Advertisement
