Advertisement
Specifications
General
Model name
Type
Screen size
Aspect ratio
Compliant video signal format
Format
Audio output
Operation environment
Power requirements
Rated current
External dimensions (excluding protruding
parts)
Mass
Accessories
LCD panel
Type
Effective screen size
Number of pixels displayed
Number of colors displayed
Contrast ratio (TYP.)
Input/output terminals
DVI-D (HDCP)
E. AUDIO HD/SD SDI (IN 1)
E. AUDIO HD/SD SDI (IN 2)
E. AUDIO HD/SD SDI (SWITCHED OUT)
VIDEO
COMPO. (Y, P
/B-Y, P
/R-Y)
B
R
AUDIO (IN)
AUDIO (MONITOR OUT)
REMOTE (MAKE/TRIGGER)
REMOTE (RS-485)
REMOTE (RS-232C)
28
DT-V17G15Z
MULTI FORMAT LCD MONITOR
Type 17 wide format
16:9
☞ "Available signals" on page 29
3G SDI
:
DUAL LINK HD SDI
:
HD SDI
:
SD SDI
:
EMBEDDED AUDIO
:
Internal speaker: 1.0 W + 1.0 W
Operating temperature: 5°C – 35°C (41°F – 95°F)
Operating humidity: 20% – 80% (non-condensing)
(Slightly variable depending on ambient conditions for installation.)
AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz or DC 12 V – 17 V
0.6 A (AC 120 V)
0.4 A (AC 220 – 240 V)
4.0 A (DC 12 – 17 V)
with the stand
Width:
430 mm (17˝)
Height:
349.8 mm (13 7/8˝) (High)
314.5 mm (12 1/2˝) (Low)
Depth:
199 mm (7 7/8˝)
7.1 kg (15.7 lbs) (with the stand) 5.4 kg (11.9 lbs) (without the stand)
AC power cord × 1, Power cord holder × 1, Screw × 2 (for power cord holder)
17˝ wide, active matrix TFT
Width: 382 mm (15 1/16˝) Height: 215 mm (8 1/2˝) Diagonal: 438 mm (17 1/4˝)
1920 × 1080
1073 million
800:1
DVI-D signal input (compatible with HDCP): DVI-D connector x 1 (compatible with DDC2B)
Digital signal input (compatible with EMBEDDED AUDIO/3G SDI/DUAL LINK signals):
Auto detection, 2 line, BNC connector x 2
* Use both IN 1 and IN 2 terminals when selecting DUAL LINK SDI .
Digital signal output (compatible with EMBEDDED AUDIO/3G SDI signals):
1 line switched out, BNC connector x 1
Input/output of composite signal:
1 line, BNC connector x 2,
1 V (p-p), 75 Ω
* The input (IN) and output (OUT) terminals are bridgeconnected (auto termination).
Input/output of analog component signal:
1 line, BNC connector x 6
Y: 1 V (p-p), 75 Ω
P
/B-Y, P
/R-Y: 0.7 V (p-p), 75 Ω
B
R
* The input (IN) and output (OUT) terminals are bridgeconnected (auto termination).
Analog audio signal input: 1 line, RCA connector x 2, 500 mV (rms), high impedance
Analog audio signal output: 1 line, RCA connector x 2, 500 mV (rms)
☞ "Using the MAKE/TRIGGER system" on page 22
☞ "Using the serial communication" on page 24
SMPTE424M/SMPTE425M
SMPTE372M
BTA S-004C, SMPTE292M
ITU-R BT.656:
525/625
SMPTE259M:
525
SMPTE299M, SMPTE272M
Width:
Height:
Depth:
without the stand
430 mm (17˝)
309 mm (12 1/4˝)
102 mm (4 1/8˝)
Advertisement
