Download Print this page

JVC DT-V17G15Z Instructions Manual page 12

Multi format lcd monitor

Advertisement

Showing Input Signals (cont.)
On the Status Display
If you press the INPUT SELECT button (☞ t on page 9) currently lit, the status of the input signal and setting of MUTING are displayed for about
3 seconds.
Make the setting to display/hide the status in "STATUS DISPLAY" of the "INFORMATION." (☞ page 20)
When "STATUS DISPLAY" is set to "AUTO" or "ON," the status below is also displayed in the following cases:
– When you change the input
– When the signal condition of the current input changes
– When you turn on the monitor
When "STATUS DISPLAY" is set to "ON," the signal format will remain displayed 3 seconds after the status is displayed.
1 Signal format
For the contents displayed, see "Available signals" on page 29 and "On the signal format" below.
On the signal format
The following messages appear depending on the type of input signals and their conditions.
When a DVI-D signal protected with HDCP is input
"*" (at the end of the indication)
When no video signal comes in
"NO SYNC"
When a noncompliant video signal comes in
"Out of range"
2 Signal format of DVI input
☞ On page 21 "DVI INPUT SEL."
Status indication of DUAL LINK/3G SDI signal information
"DUAL LINK" appears when the MAIN MENU "SDI DUAL LINK" (☞ page 14) is set to "ON" in SDI input, and the 3G SDI signal information
appears when the MAIN MENU "SDI DUAL LINK" is set to "OFF."
Status indication of 3G SDI signal information
Following signal information can be displayed when a 3G SDI signal comes in.
3G A-1:
Level A mapping structure 1
3G A-2:
Level A mapping structure 2
3G A-3:
Level A mapping structure 3
3G A-4:
Level A mapping structure 4
3G B-DS1:
Level B data stream 1
3G B-DS2:
Level B data stream 2
3G B-DUAL: Level B DUAL LINK
3 Displaying the SDI FORMAT setting
Displays the sampling structure/pixel resolution of the signal format.
Displayed when the 3G SDI signal is input.
You can set the signal recognition to "AUTO" or one of the manual settings(☞ "SDI FORMAT" on page 21).
4 Setting of "MUTING"
Displayed only when muting is activated (☞ 4 on page 8).
12

Advertisement

loading