Advertisement
<Functions controlled by the MAKE/TRIGGER system>
Display
TALLY SEL
Selects the color of the tally lamp
SDI 1
Changes the input to "SDI 1"
SDI 2
Changes the input to "SDI 2"
DVI
Changes the input to "DVI"
Display
Functions to be controlled
COMPONENT
Changes the input to "COMPO."
VIDEO
Changes the input to "VIDEO."
3G-B.DS
Selects the data stream of "3G SDI LEVEL B"
DUAL LINK
Turns on or off "SDI DUAL LINK"
A.MARKER
The area marker indication
S.MARKER
The safety marker indication
FRAME
Indication of the area of the specified aspect ratio
C.MARKER
The center marker indication
MARK.SEL
Selects the items of "MARKER" *
ASPECT
Changes the aspect ratio
1:1
Displays in 1:1 mode
STATUS
Status display *
L.METER
Audio level meter display
TIME CODE
Time code display
☞ "SOURCE ID" in "INFORMATION" on page 20
SOURCE ID
WAVE FORM
Displays the wave form monitor (Normal or Difference)
VECTOR
Displays the vector scope
COLOR OFF
Color off
SCR CHECK
Screens check
I/P MODE
Change a mode according to the input picture
MUTING
Muting on/off
DIMMER
Change the intensity of the button lamps
−−−
No function
*
Selects which functions in "MARKER" are activated, non-"R-" items or "R-" items (☞ "MARKER" on page 15).
3
*
4
Displays the information shown when INPUT SELECT button of the current input is pressed (☞ "On the Status Display" on page 12). While controlling
with the MAKE system, the information is displayed only at the moment of short-circuiting.
*
While controlling with the MAKE system, the level meter is switched between displayed (short-circuiting) and hidden (opening). When "LEVEL METER
5
ch" is set to "OFF," the level meter is not displayed ("NO EFFECT" appears). While controlling with the TRIGGER system, the pattern of the audio
channel display is switched.
*
While controlling with the MAKE system, the available set-up options will be the setting value currently selected in "SOURCE ID" ("ON" or "AUTO"
6
[short-circuiting]) and "OFF" (opening). While controlling with the TRIGGER system, uses the same set-up option as those in the SET-UP MENU (☞
"SOURCE ID" in "INFORMATION" on page 20).
*
While controlling with the MAKE system, the wave form monitor and vector scope is switched between displayed (short-circuiting) and hidden
7
(opening) regardless of the "AUTO OFF" setting in the MAIN MENU. While controlling with the TRIGGER system, the screen is switched in the same
way as when pressing the SCOPE button (☞ e on page 9). If the wave form monitor and vector scope are input at the same time, the wave form
monitor is displayed.
*
8
While controlling with the MAKE system, the screen is switched between normal screen (opening) and blue screen (short-circuiting). While
controlling with the TRIGGER system, the screen changes in the same way as when pressing SCREENS CHECK button (☞ q on page 9).
*
9
Must be controlled with the TRIGGER system. The mode is switched between "NORMAL" and "CINEMA" (This function cannot be controlled with the
MAKE system).
●
You cannot assign the same function to different pin terminals.
●
The TRIGGER system switches each function by short-circuiting the pin terminal for about 1 second and opening it.
Functions to be controlled
3
4
Opening
Short-circuiting
Green
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
DS1
Off
Off
Off
Off
Off
Non-"R-" items
4:3
Off
☞ "On the Status Display" on page 12
*5
Off
*6
*7
Color
*8
*9
Off
NORMAL
—
Red
Valid
Valid
Valid
Valid
Valid
Valid
DS2
On
On
On
On
On
"R-" items
16:9
On
On
Monochrome
On
DARK
—
23
Advertisement
