Control Panel Operation - Rotabroach Element 100 Series Original Instructions Manual

Element 100 Manual

7) CONTROL PANEL OPERATION

CutSmart™ Technology
Green Zone Yellow Zone
Perfect, try to keep in A little too much
the green zone for pressure on the drill
the best cut and ease off to get back
optimum machine to the green zone.
performance.
Original Instructions
Red Zone
Overload: Back off
immediately as too
much force will cause
the motor to cut off
if you continue.
8
Aug 2016
CutSmart™ Technology
Designed for you to get the most out of your
machine and your cutters. CutSmart has an
easy to read panel that indicates when you
are drilling with too much force, which will
damage the machine and the cutters.
Allow the cutter to do the work and you will
find that a much smoother hole and faster
drilling time is achieved.