Snooze Function - Jensen JCR-375 User Manual

If no buttons are pressed when the alarm is sounding, it will continue sounding for 60 minutes
and then turn off automatically.
Wake to Radio - Turning the wake to RADIO on:
The Radio will automatically turn on when the alarm time is reached. The corresponding
ALARM 1 INDICATOR (#15) or ALARM 2 INDICATOR (#16) will
The unit will turn on to the FM radio station you selected to when the wake time is reached,
so make sure the station is set to the one you
Press the SNOOZE BUTTON (#7) to temporarily turn off the radio, or press POWER
BUTTON (#6) to turn the alarm off.
If no buttons are pressed when the radio is playing, it will continue playing for 60 minutes and
then turn off automatically.
Review the Alarm settings:
1. In standby mode, press and hold the ALARM 1 BUTTON (#1), The ALARM 1 INDICATOR
(#15) and the wake up option will flash.
Note: The frequency show on the LED DISPLAY (#18) when wake to tune-FM RADIO is
selected.
2. Tap the ALARM 1 BUTTON (#1) to check the hour of the alarm time.
3. Tap the ALARM 1 BUTTON (#1) to check the minute of the alarm time.
4. Tap the ALARM 1 BUTTON (#1) again to check volume level.
5. Tap the ALARM 1 BUTTON (#1) again return to standby mode.
6. Review the ALARM 2 setting uses the same steps above, but using the ALARM 2
BUTTON (#2) in place of the ALARM 1 BUTTON (#1).
Turning the alarms ON and OFF:
1. In Standby mode, tap the ALARM 1 BUTTON (#1) to turn on Alarm 1. The ALARM 1
INDICATOR (#15) on the LED DISPLAY (#18) will turn on. The alarm time and then the
wake up option will show on the display.
2. Tap the ALARM 1 BUTTON (#1) again to turn off the Alarm 1. The ALARM 1 INDICATOR
(#15) will be turned off.
3. Turning Alarm 2 on/off will uses the same steps above, but using the ALARM 2 BUTTON
(#2) in place of the ALARM 1 BUTTON (#1).
When the alarm sounds, tap the SNOOZE BUTTON (#7) to temporarily turn off the alarm and
activate the snooze function. The alarm will stop and turn on again 9 minutes later. This can
be repeated when the alarm sounds again within 60 minutes.
Notes:
• The corresponding ALARM 1 INDICATOR (#15) or ALARM 2 INDICATOR (#16) will
during the snooze period.
• To cancel the snooze period and the alarm, press the POWER
want to wake up

SNOOZE FUNCTION

E-9
flash.
to.
BUTTON (6).
flash