Snooze Function - Jensen JCR-212 User Manual

Wake to AM/FM Radio - Turning the "wake to" Radio ON:
The Radio will automatically turn on when the alarm time is reached. The
corresponding ALARM 1
The unit will start playing the last AM or FM radio station you listened to when the
wake time is reached, so make sure the station is set to the one you
up to.
The volume level will start out low and gradually increase to maximum volume.
Press the SNOOZE BUTTON (#4) to temporarily turn off the radio, or
POWER BUTTON (#7) to turn the radio off.
If no buttons are pressed when the radio is playing, it will continue playing for 60
minutes and then turn off automatically.
Review the Alarm time setting:
In standby mode, press and hold the POWER
mode. Repeatedly tap the POWER
setting in sequence (AL1 hour – AL1 minutes – AL1 frequency – AL2 hour – AL2
minutes – AL2 frequency – Standby Mode).
Note: The unit will automatically return to standby mode if no buttons are pressed
within 5 seconds.
Turning the alarms ON or OFF
In standby mode, repeatedly tap the ALARM 1 / ALARM 2 BUTTONS (#5 / #6) to
select wake up sources or off to enable or disable the respective alarm. The
corresponding ALARM 1
light when the alarm is enabled.
Notes:
• For setting a one-day alarm, set the desired alarm time the day before following the
"Setting the alarms" section above.
• The alarm will sound the next day at the set alarm time.
• After turning off the alarm, follow the "Turning the alarms ON or OFF" section
above to select Alarm Off to prevent the alarm from sounding again the next day.
When the alarm sounds, tap the SNOOZE BUTTON (#4) to temporarily turn off the
alarm and activate the snooze function. The alarm will stop and turn on again 9
minutes later. This can be repeated within a hour.
Notes:
• The corresponding ALARM 1
(#12) will flash during the snooze period.
• To cancel the snooze period and the alarm, press the POWER
or ALARM 2 INDICATOR (#11 or #12) will flash.
BUTTON (#7) to review the alarm 1 & alarm 2
INDICATOR (#11) or ALARM 2

SNOOZE FUNCTION

INDICATOR (#11) or ALARM 2
E-9
BUTTON (#7) to enter alarm set
INDICATOR (#12) will
BUTTON (#7).
want to wake
press the
INDICATOR